(02) 6117 0989

As we all know, HVAC is heating, ventilation, and air conditioning system lets us get heating and cooling in our residential as well as commercial buildings. We can use HVAC systems anywhere from a single-story house to a submarine. This means that it is environmental-friendly too. Sometimes we take it for granted that there is a great impact on our quality of life through the HVAC system. Since there is a significant investment while installing an HVAC system, it must be taken care that we are comfortable all year round.

So here are the steps that you must consider while choosing the right HVAC system for your home.

  1. Finding the best furnace

If you want to install the best HVAC, then you must consider replacing your old heating system with a newer energy-efficient system to get the best experience during winters. This will provide you with a proper heating system and save up to 20% in energy costs. In addition, researchers have shown that old furnaces have an annual fuel utilization efficiency rating as low as 56%, whereas the newer furnaces will provide you with efficiency as high as 98.5%. This increase in efficiency is just because of improvement in the designs of the air handlers. While purchasing a new furnace, there are three basic choices for air handler type.

  • Single stage air handlers

These types of furnaces were widely used in older times. Screenshot Single stage air handlers have only one high-speed setting. As a result, the motor of such handlers runs at a maximum speed regardless of the heating requirement inside the home. This led to a lot of wasted energy units to keep the house warm.

  • Two-stage air handler

Two-stage air handlers can run on two-speed settings that are low and high. This lets you get better options and saves energy, since the low setting is usually capable enough to maintain a comfortable indoor temperature. In comparison, the high-speed setting is only required When a large amount of warm air is required instantly.

  • Variable-speed air handlers

These types of motors can run at varying speeds. This provides you with better energy efficiency because of the different options of speed available in them. Since you must get the right size of equipment for your home to ensure greater efficiency, variable speed air handlers are best. You must first consider a contractor to calculate the size of the heating system that is required at your home for optimal and efficient operation.

  1. Finding the best air conditioner

Since we live at a place where we have to face summers also, it is necessary to get the best air conditioner for your HVAC system. An efficient and higher-performance air conditioner is vital to keep your home cool and maintain the quality of air indoor. The rating of air conditioners can be determined through their seasonal energy efficiency ratio. The higher the number, the higher will be the efficiency. So upgrading to a new air conditioner with a high seasonal energy efficiency ratio will provide you the best energy efficiency that may reduce your energy bill by 40%. The best option that you can go for is an air conditioner with variable speed scroll compressors. This type of air conditioner produces less noise than the older models. Also, while choosing, you must ensure that the air conditioner must be with an all-aluminum evaporator coil. These are less prone to leak and corrode as compared to the older ones.

  1. A heat pump can be considered.

If you are the one who prefers to get an all-in-one heating and cooling system, then buying a heat pump can be considered. The modern heat pumps work just like air conditioners when it comes to cooling mode. However, these heat pumps use a refrigerant to remove the heat from inside your home. Also, if you want to heat your home, you can use the reverse valve to change the refrigerant flow direction. Thereby, it will allow the heat to get inside your home.

  1. Check the duct work

Getting and purchasing the right equipment is not the only thing that involves choosing the right HVAC system for your home. First, you should get a professional contractor to check and inspect the duct currently installed in your home. It must be ensured that these duct is in good condition before you buy new equipment. Next, sealed joints and breakage must be repaired in the ductwork. This may lead you to get 30% more efficiency in the entire system. Finally, the contractor must ensure to insulate the duct and clear the dust from it.

So these are the most efficient and effective electrical systems that are currently available in the market. These types of equipment will help you to save easily up to 40% of your electricity bills. Also, it would help if you considered a professional contractor for more information to choose the best system for your home.


How useful was this post?

Click on a star to rate it!

Call Now